CGDI Prog MSV80 Full Version and CGDI AT-200 ECU Programmer ISN code reader

CGDI Prog BMW MSV80 BMW CGDI Prog Car Key Programmer 

 

CGDI Prog BMW MSV80 BMW CGDI Prog Car Key Programmer

Top 8 Reasons To Get CGDI Prog BMW MSV80:

1. High technical tool which mainly support BMW Auto diagnose, programming and security maintenance 3 in 1.

2. Support Key Programming for BMW CAS1/CAS2/CAS3, Support Key Matching and All key lost for CAS4 /CAS 4+, BMW OBD Key Match, CAS4 Key Match, BMW ISN, Bootstrapper upgrades, FEM/BDC Key Match, CAS3 Key Match, BMW F Series Program, BMW Enable/Disable Key, BMW F Series Coding, EGS ISN, CAS Mileage Reset, Porsche 987/911 key learning, 95128/95256 Read and Write, BMW E Series Program, BMW E Series Coding, Maserati Meter Mileage Adjustment, BMW Data modification and verification. (All Functions FREE Since Mar 9th, 2019!)

3. Software response fast, short time programming, and new breakthrough in operation safety and technical support.
4. Supported Languages: English, Chinese
5.  Certification: CCC,CE,GS, CCC,CE,GS,ISO
6. Warranty:1 year 
7. Free Update Online on official website , when you receive the device, please download software on official website too.

8. Add for BMW FEM/BDC Function for free

 Add following listed functions for free since March 9th, 2019

QQ20190313150517

Notice:
1. CGDI MSV80 BMW no need activation now, more convenient for customers.

Notice:
CGDI MSV80 BMW no need activation now, more convenient for customers.
Please just download software from official website and use. When it gets invalid, just operate as below to check for update then device will work in normal condition again.

QQ20180327142432


CGDI BMW Update Information:

CG-DI V2.5.0 NEW (2019.01.10)

1. Added BMW E series programming, support single module programming of E60, E65,
E70, E89, R56 and other chassis models (multimedia module requires fiber optic
communication, temporarily not supported).
2. Added BMW E series code, support E60, E65, E70, E89, R56 and other chassis models
single module code, backup code and recovery code.
3. FEM/BDC key matching: Add 0000155E.018_120_010, 00002419.081_010_020 two versions
of FEM/BDC with key.
4. F/G system programming: increase the support of swfk, flup, blup programming
files, and fix some programming failures.
5. CAS1-CAS3+ key matching: increase the Rolls-Royce CAS1, CAS2 key matching.
6. BMW data modification: Add CAS3+, CAS4+ ISN encryption and decryption functions.
7. Maserati Mileage Adjustment: Added the function of saving EEPROM data.
8. BMW F-series codding:Fix List display incomplete.

CGDI BMW Version: [2.4.0] 29/12/2018
1. New: BMW data modification function: support CAS3/3+ data modification VIN, ISN, support CAS4/4+ data VIN, ISN modification, support N20 data VIN, ISN modification.
2. BMW F/G series programming: support automatic code setting after programming; repair some problems of instrument programming failure; repair some EPS programming failure problems; repair ECU list display error.
3. CAS mileage reset: fix the problem of partial version programming failure.
4. Firmware upgrade: Improve USB communication performance.

CGDI BMW V2.2.5 NEW(2018.09.06)
1. Fix some win7 users fail to open the software.
2. Fix a problem that a version has failed to erase the mileage.
3. OBD key matching: increase support for 9389115, 9395657 two versions of CAS3++
4. BMW ISN: Add 9389115, 9389116, 9395656, 9395657 four versions of CAS read, write, read and write ISN
5. Increase CAS mileage reset function, support CAS1-CAS3+, a small number of versions of CAS are not supported, if you do not support you can try to upgrade to a supported version.

The following are the supported CAS hardware numbers:
CAS3:6943770,6943774,6943776,6943777,6943779,6943780,6943783,6943784,6943788,6943790,6943798,6943805,6943806,6943816,6943817,6943823, 6943824,6943832,6965769,6985696,6985697,9147170,9147171,9147184,9147193,9147194,9147197,9147198,9147199,9147200,9147201,9147202, 9147207,9147208,9147209,9147210,9147211,9147218,9147219,9147228,9147229,9230591,9257219,9257220,9273192,9273193,9283153,9283154,9314256,9321069
CAS2:4113748,4113918,4113919,4114222,4114373,4116023,4116658,4117916,4119466,4121910,4125233, 4125709,4142256,6922390,6927930,6931395,6943745,6960978,6961659

CGDI BMW V2.2.3 Update (07/19/2018):
BMW ISN:Add DME wiring diagrams for D62M57A0, ME9N62_2, MEV9N46, MEV17_2N, MEVD176K, MEVD1724, MEVD1725, MS450DS0, MV1722, MVD1722
FEM/BDC key matching: Add “write EEPROM” function. Optimize read and write processes
Fix CAS4 key matching to determine the CAS type is incorrect
CGDI V2.2.3 (03/08/2018)
Fix the problem that the codding ICM module is invalid

CGDI BMW V2.2.2 Update (June 22th, 2018):
1.BMW OBD key matching: increase “add key” function.
2.FEM/BDC match key:
(1)increase 95128/95256 read and write function (need use full adapter included )
(2)repair and change FEM/BDC the problem of writing data error
(3)increase new version SWFL support (ISTA-64)
3.BMW ISN:
(1)increase F series read DME ISN type :MEVD172Y MEVD1724 MEVD1725 N63TU_R0 N63TU_L0 S63TU_R0 S63TU_L0
(2)increase E series read DME ISN type :ME17N45(N45 Tricore) MEV17N46(N46 Tricore) MED17_2 MED17_2N(N14 Tricore) MEV17_2 MEV17_2N(N12 Tricore) MV1722(N16 Tricore) MVD1722(N18 Tricore) MEVD174K(N20, Tricore) MEVD176K(N55 Tricore) MVD1727(N18 Mini Tricore) MEVD17KW(Tricore) MSV70 MEV9N46L ME9N62 MEV9N46 N62_TUE N62_TUE2 MS450DS0 ME9N62_2 ME9N45 ME9E65_6 N73_L0 N73_R0 D7xN47xx D7xN57xx D60PSA0 MSS60 DDE604 DDE626 DDE603 DDE509 DDE606 DDE608 D50M57A0 DDE506 D50M57C0 D50M57E0

CGDI BMW V2.2.0 Update (Apr 25th, 2018):
Kindy note this update works for customers also have CGDI MB or CG Pro or CG100 Full Version only.
1. Increase BMW F series coding, restore coding and backup coding.
2. Add BMW EGS function.
3. Add read/write BMW CAS ISN (4 bytes) feature.
4. Modify software auto activation display, increase user interaction.
5. DEM wiring diagram optimization provides full-screen display.
6. BMW OBD key matching and FEM/BDC compatible small screen display.
7. Modify CAS4 key whether display error.
8. Other bugs fix.

CGDI MSV80 BMW Car Key Programmer Support Module list:

1.BMW CAS1/CAS2/CAS3/CAS3+/key increasing matching,KEY all lost matching,CAS computer replace,CAS3+/P4X above version can directly downgrade by OBD in 5 minus 100% safety.
2.BMW CAS4/CAS4+/Support key matching,support key all lost matching.
3.Support BMW key inspection,can check key what status in.
4.Support BMW engine computer DME replacement.
5.Support BMW MSV80/MSD80/MSD85/series OBD read ISN code (no need to split computer when matching key) Exclusively support in Domestic
6.Support BMW Key unlock.

CGDI MSV80 BMW Car Key Programmer CGDI Functions:

1.Update in real time,products updated in zero cycle time,support model added in real time.
2.BMW CAS3/CAS3+Data repair–support change replace and split CAS computer,BMW MSV80/MSV80.0/MSD80/MSD80.0/MSD85/engine change computer,ISN code reading and writing.
3.Equipment security greatly enhanced, the hardware anti-crack,anti-software copy.

CGDI Prog BMW MSV80 Support Model list:

Model Has key to match key Without key to match Read ISN code Replace engine computer DME BMW Key unkock Working time
CAS1 support support support 1 minute
CAS2 support support support support 1 minute
CAS3 support support support support 1 minute
CAS3+ support support support support 1 minute
CAS4 support support support 30 seconds
CAS4+ support support support 30 seconds

CGDI Prog BMW MSV80 Read MSV80 Specification:
Method 1: can read directly ISN code in the car,pls be assure car voltage is 12V above,directly connect OBD to operate–time about 5 minus.
Methods 2: can directly split engine computer (DME) to operate–connectline as follows:

2017071704783730

 

cgdi-pro-bmw-msv80-key-programmer-pic-4

 CGDI Prog BMW MSV80 Software Update Guide:
Step 1. Receive message ” There is a new version”, click on “OK”
Step 2. Click on “Setting”, then “Check for updates”, waiting until the next dialog box appears.
Step 3. Checking local file.
Step 4. Detects a new file, click “Yes” to update.
Step 5. Downloading file.

CGDI Prog BMW MSV80 Firmware Update Guide:

Step 1. Connect CGDI Pro device to the computer, open CGDI software.
Step 2. Click on “Setting” and then “Upgrade the firmware”, waiting.
Step 3. Updating…
Step 4. CGDI programmer firmware update successfully, again click on “Upgrade the firmware”.
Step 5. Get message reading ” The version is already up to date without upgrading”. Click on “OK”.

Detail info about CGDI BMW MSV80 Software & Firmware Update pls visit Teah Support at the top section.

CGDI Prog BMW Customer Feedback:
CGDI BMW can reprogram EGS for 2009 BMW x5.
CGDI Prog BMW supports BMW 650i 2003 all key lost.
CGDI BMW can read and write the ISN EWS egs for BMW M5 F10 dct gearbox 2013. Can read from DME and write into egs.
CGDI PROG bmw f20 2014 mileage reset OK
Read ISN DME MSD80 OK 5WK93628
Excellent tool so far. no bricks or problems.
extremely fast for cas1, 2 & 3
for cas3+ if need downgrade 10 minutes and seems safe.
make sure you have proper power on the car

cas4 F10 – ok (new key)
cas4+ F10 – ok (new key) isn from org key or dump DME
fem/bdc F31 – ok – reset mileage, change isn, change vin, make keys with oryginal key and with dump from DDE
cas3+ E60- ok , downgrade and make key with isn from org key

You can reuse an old key and reprogram it, there is a button that says unlock key. I tried and worked with aftermarket key, did not try on a original BMW key to unlock(tested on e60 cas2)
and yes it is safe if downgrade for CAS3+.

Read ISN form MSV80 result OK
Read and write ISN cas 3 result OK

Did a 2008 E60 CAS3+ had to DOWNGRADE it took about 10min and programmed key successfully

Did a 2008 E60 528i it asked for Downgrade it took around 10min no error codes all perfect key works

Instructions for cas4 F10 key programming:
Cas4 can only be done by reading DFlash from Freescale cpu then load into programmer software and generate key. It can no ne done by obd.
You need xprog or vvdi prog to read the dflash.

CGDI BMW Prog FAQs:
Q1: How to authorize CGDI BMW EGS ISN function?
A1: The user needs to disassemble and wire the cable. There is no additional cable to work with.

AT-200 ECU Programmer:

AT-200 supported ECU List:MSV90,MSVD85, MSVD85.1,MSVD85.2, MSVD87, MSVD87.2, N55, N20
Will add B48, MB271,VAG W06J later

1. Auto ECU Programmer —Support BMW ECU Data reading, writing and clone.
Effectively solve the problem of replacing the second-hand computer after the damage of BMW ECU control unit, just need to read the original computer data and then clone it.
Support almost all the BMW ECU model for reading and writing: MSV90 MSD85 MSD87 N2055 B38 B48
Successfully make up the market for BMW ECU reading and writing equipment, save you high equipment costs.

2. Auto Locksmith tool-Support BMW IMMO functions, Read BMW ISN Code by OBD
Quickly solve the problem for data collection of bmw all key lost.
With more stable and efficient unremovable functions.
If you want to do all key lost for BMW 3 Series 5 Series 7 Series X5 X6 GT535 Six-cylinder engine, must need ISN code to program the keys.

3. Works together with CGDI BMW and other equipment to program keys, save your money.
(The cost of similar equipment is very expensive).

4. With stable and effictive functions by professional quality test. and easy to operate and quick to start.

5. Will add Mercedes-Benz 271 Audi Volkswagen 06J and other ecu types in next updates.

CGDI Prog BMW MSV80 Package Includes:

1pc x CGDI Prog BMW MSV80 Main unit
1pc x Adapter
1pc x USB line

Advertisements

发表评论

Fill in your details below or click an icon to log in:

WordPress.com 徽标

You are commenting using your WordPress.com account. Log Out /  更改 )

Google photo

You are commenting using your Google account. Log Out /  更改 )

Twitter picture

You are commenting using your Twitter account. Log Out /  更改 )

Facebook photo

You are commenting using your Facebook account. Log Out /  更改 )

Connecting to %s